Скачать с ютуб How to Fill/Patch Spoiler Holes в хорошем качестве

How to Fill/Patch Spoiler Holes

We are going over the steps to fill OEM spoiler holes for a 2020 Mustang EcoBoost with the intent of installing an aftermarket spoiler. The steps will also include painting the trunk to match the OEM paint. Important: Rattle can paint is very difficult if not impossible to obtain 100% match as there are just too many variables, especially regarding metallic colors. 1. Intro - 0:01 2. Remove Old Spoiler/Lip - 0:28 3. Step 1 (Chamfer Holes) - 1:07 4. Step 2 (Scuff/Prep Surface) - 1:54 5. Step 3 (Clean Surface) - 2:30 6. Step 4 (Apply Tape) - 2:55 7. Step 5 (Apply Glass Reinforced Filler) - 4:03 8. Step 6 (Sand Glass Filler) - 5:25 9. Step 7 (Clean Surface - IPA) - 5:37 10. Step 8 (Apply Glazing and Spot Putty) - 5:55 11. Step 9 (Sand Spot Putty) - 6:29 12. Step 10 (Wet Sand Surface) - 6:46 13. Step 11 (Clean Surface (In & Out) - IPA) - 7:05 14. Step 12 (Apply Primer (Inside)) - 7:20 ------------ Method 1 ------------ 15. Step 13 (Prep Surface) - 7:37 16. Step 14 (Apply Sandable Primer) - 7:47 17. Step 15 (Wet Sand Surface) - 8:12 18. Step 16 (Clean Surface - IPA) - 8:28 19. Step 17 (Prep Surface) - 8:39 20. Step 18 (Apply Base Coat) - 9:01 21. Missing Footage Issue ------------ Method 2 ------------ 22. Step 19 (Remove Trunk) - 10:28 23. Step 20 (Sand Trunk) - 11:20 24. Step 21 (Wet Sand Trunk) - 14:11 25. Step 22 (Clean Surface - IPA) - 14:56 26. Step 23 (Apply Sandable Primer) - 15:07 27. Step 24 (Wet Sand Surface) - 15:42 28. Step 25 (Clean Surface - IPA) - 16:03 29. Step 26 (Prep Surface) - 16:13 30. Step 27 (Apply Base Coat) - 16:26 31. Step 28 (Prep Surface) - 17:28 32. Step 29 (Apply Clear Coat) - 17:38 33. Step 30 (Install Trunk) - 19:18 34. Show it off! - 19:49 Paint Supplier: https://www.automotivetouchup.com/ Products Used: This video contains affiliate links for which I may receive compensation. 2K Clear Coat - https://amzn.to/3lxsxgp 2-in-1 Filler & Sandable Primer - https://amzn.to/3uAreoN 91% Isopropyl Alcohol - https://amzn.to/414EgY8 Black Nitrile Gloves - https://amzn.to/3TvBVjI Body Filler - https://amzn.to/49ZzSNN Body Filler Spreaders - https://amzn.to/4a1B0R0 Center Punch/Stepper Bits - https://amzn.to/3K70pLt Deburring Tool - https://amzn.to/3lJXmif Disposable Drop Cloth - https://amzn.to/3wqJ1xk Eraser Wheel - https://amzn.to/411MQXk Fishing Line - https://amzn.to/3R5oMyt Glass Reinforced Filler - https://amzn.to/3Ta94EV Glazing and Spot Putty - https://amzn.to/4122HVW Mixing Board - https://www.harborfreight.com/mixing-... Painter's Tape - https://amzn.to/3MvGM1b Respirator - https://amzn.to/3MOE08f Sandpaper (60-5000grit) - https://amzn.to/47XJFlI Tack Cloth - https://amzn.to/3TiAR2W Trim Removal Tool Set - https://amzn.to/35Lry84 Tools: 1/4" Socket Wrench 7mm Socket 10mm Socket 91% Isopropyl Alcohol 40lb Fishing Line Body Filler Spreaders Deburring Tool Disposable Drop Cloth Drill Eraser Block Eraser Wheel Glass Reinforced Filler Glazing and Spot Putty Microfiber Cloth Mixing Board Nitrile Gloves Painter's Tape Respirator Safety Glasses Sandpaper (80-1000 Grit) Stepper Drill Bits Soap and Water Solution Trim Removal Tool Set Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk. #HolePatch #SpoilerHoles