Русские видео

Сейчас в тренде

Иностранные видео


Скачать с ютуб etrailer | The Low-Down on the Installation Kit for Go Power Inverters в хорошем качестве

etrailer | The Low-Down on the Installation Kit for Go Power Inverters 6 лет назад


Если кнопки скачивания не загрузились НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу страницы.
Спасибо за использование сервиса savevideohd.ru



etrailer | The Low-Down on the Installation Kit for Go Power Inverters

Click for more info and reviews of this Go Power RV Power Inverter: https://www.etrailer.com/Accessories-... Check out some similar RV Power Inverter options: https://www.etrailer.com/dept-pg-Acce... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Go-P... Speaker 1: Today we're going to take a look at the 200 amp installation kit for the Go Power 12 volt or 24 volt inverters. Now this installation kit will include everything that you need to connect your inverter to your battery. This is a 200 amp installation kit, it is designed for 12 volt inverters, 1100 to 1800 watt size, and 24 volt inverters, 2000 to 3000 watt size. This kit will include everything laid out here on the table. Gives you 10 feet of the red number two gauge wire cable, 10 feet of the black number two gauge wire cable, a class T 200 amp inverter fuse with the block and a nice cover, and all the necessary hardware that you need. Clamps, screws, cable ties to install it and a nice set of detailed instructions that'll describe how to install it with pictures.And the installation of this actually is pretty simple. I'll briefly just go through it here. But basically what you want to do is you'll install this fuse block on the positive cable near the battery. Basically what you do is take this red wire. You cut it in two. You take the first piece, connect it to the positive side of the battery and run the other end to the side of the fuse block. You take the second piece of the red wire, connect one end of that piece to the fuse block here and the other end you connect to the positive side of the inverter. The black wire here, you just run that directly from the negative battery side directly to the negative side on the inverter. So pretty simple, and again, it gives you a nice set of instructions describing that.But that should do it for the review on the 200 amp installation kit for the Go Power 12 volt or 24 volt inverters.

Comments