Скачать с ютуб ANCA’s CPX In-Process OD Measurement System achieves tighter tolerances for lights-out production в хорошем качестве

ANCA’s CPX In-Process OD Measurement System achieves tighter tolerances for lights-out production

The new CPX In-Process OD Measurement system delivers a solution that not only enables lights-out production but further increases productivity on tighter tolerances to meet a CpK of greater than 1.33 on a 0.003mm tolerance. It is a quality control system that monitors and controls the OD of ground blanks within a batch production. The CPX Linear performs batch grinding with high material removal rates and to tight tolerances, however the OD measurement system takes it further thanks to the SPC feature that comes standard with the OD measurement software. SPC is user-defined, and the tolerances along with the Cp and CpK values are constantly monitored, controlled, and reported to the user. The OD measurement system is permanently mounted inside the machine and only called upon when required. Based on the set tolerances and the frequency of measurement, an accurate in-process measurement and compensation is applied to maintain the blank OD to the nominal diameter. Features and Benefits - In-process OD measurement and automatic compensation - Multiple diameters can be measured along the length of the blank - Measured diameters recorded and available to the user to carry out offline Statistical Process Control - Cp and CpK limits can be configured and monitored live - Blanks that are out of the programmed tolerance are marked for easy identification in the Loadermate software - Lights-out blank production Learn more: https://machines.anca.com/Products/Ma...