Скачать с ютуб etrailer | Review of the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear в хорошем качестве

etrailer | Review of the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear

Click for more info and reviews of this TorkLift RV Steps: https://www.etrailer.com/RV-Steps/Tor... Check out some similar RV Steps options: https://www.etrailer.com/dept-pg-RV_S... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-Tork... Today, we're going to take a look at the Torklift Glow Step Revolution Scissor Steps with the landing gear. This is a six step version. It has a 300 pound weight capacity. These pull out steps will make it very easy to get into and out of your camper, RV or trailer. The landing gear on the very bottom here creates a nice, stable connection from the bottom step to the ground. I'm going to try to pull this up so you can see it a little bit better. Here's your landing gear right down here. They're adjustable legs. They help to stabilize your stairs even on uneven terrain. You just push in the button here and you can raise or lower the leg itself. They have large, rectangular foot plates on it that will help provide level support and prevent any sinking into the ground. There's no assembly required. Basically, the landing gear comes pre-installed on the bottom step and you just slide the legs up into the landing gear. We'll just go ahead and put it back down. The release lever on the mount up here, this will let you quickly and easily deploy the steps. You just simply lift the lever on either side here. When you lift the lever, you can pull out the steps and then when it gets as far as you need them, the lever will secure with the included bail pin that's over on that side. The adjustable base will let you raise or lower the steps and you use the release lever to secure the steps at either high, medium, or low elevation. What's nice on these steps, these are called the glow step. On each step, right here on each corner, they actually use a glow tape that will create a lighted step surface for safely climbing into and out of your camper at night. They are adhered to the steps right here and they'll glow in the dark for up to about ten hours with only about five minutes of light exposure. The scissor design on the steps themselves will let you manually collapse the steps and fold them up into the mount right up here. This is made of an aircraft grade aluminum and stainless steel construction, which is very durable and rust proof. It has the built in sure grip tread on the step surface to help provide excellent footing when walking up or down. The stainless steel hinges, they're bolted together for easy add on and removal or replacement of individual steps, if needed. They do use bushing bearings on them, which offer a smooth action and are longer lasting than standard riveted connections. The sturdy mounting base right up at the top here will bolt onto your RV with the included hardware that comes in the pack. This part is made in the USA. Again, the weight capacity on this is 300 pounds. There is an additional accessory that Torklift makes called the Glow Guide Hand Rail. It's part number TLA7620. We do sell that separately on our website. If you do add that on to the steps, that will actually raise the capacity to 325 pounds. I do want to give you a few dimensions on this. The step platform dimensions. The width is right at 22 inches. The depth of each step is right at 8 inches. The mounting base, which is the black portion right up here, the width on that base, edge to edge, is going to be right at 25 7/16. The depth, it goes underneath, is right at 12 inches. The drop and rise on the step is going to be right at 7 1/2 inches. Again, there are six steps. The height of these steps when they're fully collapsed will range anywhere from 20 1/2 to 21 1/2 inches. That should do it for the review on the Torklift Glow Step Revolution Scissor Steps with the landing gear, six step version and a 300 pound weight capacity.