Скачать с ютуб How to: Dyno Mode for your 2016+ Focus RS в хорошем качестве

How to: Dyno Mode for your 2016+ Focus RS

For those of you who plan on putting your Focus RS on the dyno you're going to want to put your car into dyno mode first. The reason for this is if the car isn't put into dyno mode the advancetrac as well as ABS will cause issues and you'll see incorrect as well as lower numbers. The process to put the car into dyno mode is as follows. 1. Press the power/accessory/start button once. Do not start the vehicle. 2. Press the clutch and brake pedal to the floor holding them there. 3. From the neutral position shift into reverse and then back to neutral 6 times. 4. After you've shifted into reverse and back to neutral 6 times you'll see the ABS light flash and advancetrac as well as ABS will be turned off. 5. Start the car and run it on the dyno. Once the car is turned off and restarted it will go back to normal mode. If you have any questions regarding any products or services we offer for the Focus RS please feel free to give us a call at 561-753-8105. www.lethalperformance.com   / 1061389983909042   Big thanks to Jack Cecil of Horsepower Logic in Royal Palm Beach for letting us use the dyno and many years of support.