Скачать с ютуб 2008 Subaru - Dim Headlight – Fixed в хорошем качестве

2008 Subaru - Dim Headlight – Fixed

The passenger side headlight on my 2008 Subaru Outback was very dim when on 'low' beam and would turn off completely when switched to 'high' beam. Replacing the DLR (Daylight Running Light) module (as demonstrated in other videos on Youtube), did not correct the problem and was a major pain in the neck to change anyway. I had replaced both bulbs with new ones and made sure the bulbs were seated properly in the headlight assembly (also discussed on many forums). They were still dim. After several hours scouring the internet, I came across a comment from someone that mentioned the fuses. I had used a test light to check for voltage at the fuses but, as mentioned in the video, had done it incorrectly. Had I tested it correctly, I would have found the blown fuse before doing a lot of unnecessary work. Replacing the fuse corrected the problem, thankfully! Apparently, both headlights share wiring but have independent fuses. If one goes out, the other fuse doesn't allow enough current to allow the other headlight work properly. That being said, if you had a dim driver-side headlight and a bright passenger headlight, this should fix it by replacing the other fuse (explained in the video). I'm not positive, but believe this fix will work on Outbacks (and maybe other trims) from 2005-2009. It may also work on other models. If this video helps you out, please leave a comment below and subscribe to my channel. Thanks for watching!