Скачать с ютуб Fox Factory Series Float 34 FIT4 2021 fork FULL Service guide for beginners. Long but SUPER detailed в хорошем качестве

Fox Factory Series Float 34 FIT4 2021 fork FULL Service guide for beginners. Long but SUPER detailed

Attention: Near the end of the video, when installing the nuts back onto the lower legs, I mentioned 6nm for both nuts. TECHNICALLY, Fox's recommendation is 5.7nm for the air-side nut (which I do mention in the video) and 9nm for the damper-side nut, which I forgot to mention. I purposely torque both nuts to 6nm. This is a personal choice, but I should have mentioned the 9m for the damper side nut in the video This is a VERY detailed step by step full service guide video for a 2021 FOX Factory Series 34 Float FIT4 Fork. This is a long video, but it goes into FULLY servicing the compression stack, which I consider an optional service, As always, If you have any questions, feel free to leave them in the comments section below, and I will answer them the first chance I get. Chapters 00:00 Intro and tools 10:44 50 Hour Service Part 1 27:00 Air Spring Service 50:51 Damper service - Example of what a damper SHOULDN'T sound like 01:13:37 Optional - bladder replacement 01:19:37 Optional - FULL compression stack service 01:41:16 The Bleed 02:01:27 50 Hour Service Part 2