Скачать с ютуб Making the Ultimate Lathe Carriage Stop | Shop Made Tools в хорошем качестве

Making the Ultimate Lathe Carriage Stop | Shop Made Tools

This is a must watch video if you are contemplating making a Carriage Stop for your lathe. This is the full build of a MICROMETER CARRIAGE STOP for the metal lathe. The TOOLMASTER comes with a factory made 4-position length stop but I don't use is so I want to upgrade to a new one. My Colchester has factory 5-position turret stops for both the longitudinal and cross feeds but my Toolmaster doesn't- so I built one with a micrometer to 0.1mm resolution. There's a lot of action on the Colchester with the both 3 and 4 Jaw Chucks; a Collet Chuck and the Centering Tool comes into play. There's a lot of milling with both End Mills and Face Mills getting some use. There is a segment on ENGRAVING that includes the Divider. We will test the Colchester and the Toolmaster with their respective carriage stops and test the new micrometer. Timestamps: 00:00 Introduction 00:20 Titles 00:30 Description 00:50 Drawings 01:05 Tramming the Mill Vise 01:50 Cutting the Cast Iron Bed Block 03:10 Milling the Bed Block to size 05:10 Milling the Bed Block Features 05:50 Little Hoggers 04:05 Setting up the Bed Block to a 45deg angle 07:55 Milling the Bed Block for the Vee Way 08:45 Milling the seat for the clamp 09:20 Test Fit 1 09:30 Finishing and Chamfering the Bed Block 09:55 Making the Clamp 11:05 Cleaning up the Clamp 12:00 Milling the seats and drilling the holes for the cap screws 13:40 Drilling & tapping the Clamp 14:45 Test Fit 2 15:40 Making the Plate 17:20 Drilling the counterbored holes in the Plate 19:00 Making the Rod 20:20 Setting up the Die Holder and cutting the thread 22:00 Machining the other end of the Rod 23:05 Machining the 12mm Spanner flats 23:40 Using the 4 Jaw Chuck Centering Tool 25:00 Machining the hole and thread in the Plate for the Rod 26:15 Machining the register for the Rod 27:00 Machining the Micrometer Thimble 28:30 Knurling the Thimble 29:10 Special Spindle Nose Adapter D1-3 to 1 1/2x8TPI 30:35 Drilling & tapping the Thimble 32:35 Turning a 10deg taper on the Thimble 33:30 Setting up and Tramming the Thimble in the Divider 34:55 Engraving the Thimble 35:50 Inspecting the Engraving 36:10 Parting off the Thimble 37:00 Engraving the Witness mark on the Rod 37:10 Making the Anvil 37:40 Threading the Anvil 38:25 Machining the 19mm Spanner Flats 39:30 Parting off the Anvil 39:45 Drilling & Tapping the Bed Block for the Rod 41:00 Selecting a Spring 41:40 Cleaning up the Parts 42:50 Blueing the Plate & Clamp 43:50 Painting the Tick Marks 44:25 The Colchester Carriage Stop & 5-Position Turret 45:40 The Colchester Cross Feed Stop & 5-Position Turret 46:30 The Colchester Carriage Turret Demonstration 47:00 The Toolmaster 4 Position Length Stop 47:45 The Toolmaster 4 Position Length Stop demonstration 48:05 Fitting thew Bed Stop and Micrometer 49:30 Testing the Micrometer & Conclusions 50:40 End Referenced videos: 4 Jaw Chuck Centering Tool:    • How to Align Work in a 4 Jaw Chuck - ...   Face Mill Revival:    • Face Mill Revival / Rebuild   Little Hogger End Mills: https://www.mag-pro.com.au/index/inde...