Скачать с ютуб Clamp On Ultrasonic OVERVIEW and QC в хорошем качестве

Clamp On Ultrasonic OVERVIEW and QC

Call 831-244-8080 for questions We show How Ultrasonic Flow Meters can be validated for proper setup before use. These are also called Ultrasonic Transit Time flowmeters and clamp on flow meters. These are commonly used as Ultrasonic flow meters for water and they are low cost compared to meters that require cutting into the pipe. The MAJOR BENEFIT is you can clamp these on the outside of your existing pipe without any penetrations. Tactical Flow Meter Ultrasonic Flow meters features LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units. Specifications Medium: Any acoustically conductive fluid with less than 5% air bubbles or solids Pipe size: ¼” to 240” Flow rate: 0 - 200 GPM, guessing…. Temperature: - 20 - 110 ℃ Transducer material: Aluminum and 304 SS Cable length: 8’ to 20' nominally Accuracy: ±1% from 0.15 to 40 f/s (0.05 to 12 m/s) Resolution: 0.01 ft/s (0.00025 m/s) Response time: 150 ms measuring cycle typical Transducer Frequency: 1 MHz Clamp-on transducers: encapsulated design IP68 Enclosure Protection Grade: IP65 Display LCD Screen Power Supply: 24VDC or 86-240 VAC Universal Power Supply Output: 4-20mA + 0-10K Hz + Standard ModBus RTU Communication protocol Note: For 1 to 5 VDC output, add 250 Ohm resistor to 4 to 20 mA loop. View full spec sheet here. https://www.tacticalflowmeter.com/pro... Please like this video and subscribe to our channel if this video helped you.